Vol. 17 No. 2 (2015)

ISSN 0718-221X versión en línea
ISSN 0717-3644 versión impresa

Article

Phytosanitation of mountain pine beetle infected lodgepole pine using dielectric fields at radio frequencies

Ciprian Lazarescu, Colette Breuil, Stavros Avramidis

221-228
- PDF (Español (España))
Influence of specimen orientation on determination of elesticity in static bending

Felipe Hideyoshi Icimoto, Fabiane Salles Ferro, Diego Henrique de Almeida, André Luís Cristoforo, Francisco Antonio Rocco Lahr

229-238
- PDF (Español (España))
Prediction of mechanical properties - Modulus of rupture and modulus of elasticity - of five tropical species by nondestructive methods

Jan Baar, Jan Tippner, Peter Rademacher

239-252
- PDF (Español (España))
Utilization of temperature kinetics as a method to predict treatment intensity and corresponding treated wood quality: Durability and mechanical properties of thermally modified wood

K. Candelier, S. Hannouz, M. Elaieb, R. Collet, S. Dumarçay, A. Pétrissans, P. Gérardin, M. Pétrissans

253-262
- PDF (Español (España))
Analytical and experimental studies on stress capacity with modified wood members under combined stresses

H. Abdolzadeh, Gh. Ebrahimi, M. Layeghi, M. Ghassemieh

263-276
- PDF (Español (España))
Liquefied wood as a partial substitute of melamine-urea-formaldehyde and urea-formaldehyde resins

Bruno Esteves, João Martins, Jorge Martins, Luísa Cruz-Lopes, José Vicente, Idalina Domingos

277-284
- PDF (Español (España))
Evaluation of wood surface roughness depending on species characteristics

Hektor Thoma, Leonidha Peri, Entela Lato

285-292
- PDF (Español (España))
Aplicación de celulosa nanofibrilada, en masa y superficie, a la pulpa mecánica de muela de piedra: Una sólida alternativa al tratamiento clásico de refinado

Marc Delgado-Aguilar, Elena Recas, Josep Puig, Gerard Arbat, Miguel Pereira, Fabiola Vilaseca, Pere Mutjé

293-304
- PDF (Español (España))
Characterization of the rhizophora particleboard as a tissue-equivalent phantom material bonded with bio–based adhesive

Ehsan Taghizadeh Tousi, Rokiah Hashim, Sabar Bauk, Mohamad Suhaimi Jaafar, Ali Mohammad Hamdan Abuarra, Amer Mahmoud Al-Jarrah, Baker Ababneh, Afsaneh Taghizadeh Tousi, Khalid Saleh Ali Aldroobi

305-318
- PDF (Español (España))
Physical and mechanical properties of nanoreinforced particleboard composites

Zeki Candan, Turgay Akbulut

319-334
- PDF (Español (España))
Predicting moisture content from basic density and diameter during air drying of Eucalyptus and Corymbia logs

Antônio José Vinha Zanuncio, Amélia Guimarães Carvalho, Liniker Fernandes da Silva, José Tarcisio Lima, Paulo Fernando Trugilho, José Reinaldo Moreira da Silva

335-344
- PDF (Español (España))
Application of aqueous two phase systems based on polyethylene glycol and sodium citrate for the recovery of phenolic compounds from eucalyptus wood

Lucía Xavier, María Sonia Freire, Isabel Vidal-Tato, Julia González-Álvarez

345-354
- PDF (Español (España))
Design and efficiency of a small-scale woodchip furnace

Carlos Torres-Fuchslocher, Felipe Varas-Concha

355-364
- PDF (Español (España))
Effects of thinning on diameter, heartwood, density and drying defects of gmelina arborea

Jonathan Vallejos, Roger Moya, Rafael Serrano

365-372
- PDF (Español (España))
Treatability of Melia composita using vacuum pressure impregnation

Sadhna Tripathi, Pawan Kumar Poonia

373-384
- PDF (Español (España))
The effect of moisture content on the retention and distribution of nano-titanium dioxide in the wood

Younes Mohammadnia Afrouzi, Pouya Marzbani, Asghar Omidvar Omidvar

385-390
- PDF (Español (España))
Efecto del raleo sobre las propiedades anatómicas de la madera de Pinus taeda

Rosa Ángela Winck, Hugo Enrique Fassola, María Cristina Área

391-406
- PDF (Español (España))
Influence of moisture content on the wave velocity to estimate the mechanical properties of large cross-section pieces for structural use of scots pine from spain

M.J. Montero, J. de la Mata, M. Esteban, E. Hermoso

407-420
- PDF (Español (España))
Optimización 3D de patrones de corte para trozas de Pino radiata con cilindro central defectuoso

Carlos Acevedo, Mario Ramos, Cristhian Aguilera, Danny Monsalve

421-434
- PDF (Español (España))
Changes in the chemical structure and decay resistance of heat-treated narrow-leaved ash wood

Mesut Yalcin, Halil Ibrahim Sahin

435-446
- PDF (Español (España))

Comments

Corrigendum

Maderas. Ciencia y Tecnologia

447
- PDF (Español (España))

Vol. 17 No. 2 (2015)

Article

Phytosanitation of mountain pine beetle infected lodgepole pine using dielectric fields at radio frequencies

Influence of specimen orientation on determination of elesticity in static bending

Prediction of mechanical properties - Modulus of rupture and modulus of elasticity - of five tropical species by nondestructive methods

Utilization of temperature kinetics as a method to predict treatment intensity and corresponding treated wood quality: Durability and mechanical properties of thermally modified wood

Analytical and experimental studies on stress capacity with modified wood members under combined stresses

Liquefied wood as a partial substitute of melamine-urea-formaldehyde and urea-formaldehyde resins

Evaluation of wood surface roughness depending on species characteristics

Aplicación de celulosa nanofibrilada, en masa y superficie, a la pulpa mecánica de muela de piedra: Una sólida alternativa al tratamiento clásico de refinado

Characterization of the rhizophora particleboard as a tissue-equivalent phantom material bonded with bio–based adhesive

Physical and mechanical properties of nanoreinforced particleboard composites

Predicting moisture content from basic density and diameter during air drying of Eucalyptus and Corymbia logs

Application of aqueous two phase systems based on polyethylene glycol and sodium citrate for the recovery of phenolic compounds from eucalyptus wood

Design and efficiency of a small-scale woodchip furnace

Effects of thinning on diameter, heartwood, density and drying defects of gmelina arborea

Treatability of Melia composita using vacuum pressure impregnation

The effect of moisture content on the retention and distribution of nano-titanium dioxide in the wood

Efecto del raleo sobre las propiedades anatómicas de la madera de Pinus taeda

Influence of moisture content on the wave velocity to estimate the mechanical properties of large cross-section pieces for structural use of scots pine from spain

Optimización 3D de patrones de corte para trozas de Pino radiata con cilindro central defectuoso

Changes in the chemical structure and decay resistance of heat-treated narrow-leaved ash wood

Comments

Corrigendum

Make a Submission

compartir

Keywords

wfc