Vol. 28 (2026)

View Vol. 28 (2026)
Published: 2025-12-16

Article

  • Effects of design configuration on decay initiation and progression in non-durable wood

    Rod Stirling, Grant Kirker
    e0126
    DOI: https://doi.org/10.22320/s0718221x/2026.01
  • BB

    Variación anatómica en la madera de clones de Eucalyptus grandis y sus propiedades dinámicas

    Christian Bulman Hartkopf, Rosa Angela Winck, Karen Belen Paiva Gonzalez, Pablo Marcelo Stefani
    e0226
    DOI: https://doi.org/10.22320/s0718221x/2026.02
  • A

    Ajuste de los factores de diseño en compresión axial para madera laminada encolada del álamo

    Lía Caren Meyer, Gamaliel López, Alfredo Anibal Guillaumet, María Alexandra Sosa Zitto
    e0326
    DOI: https://doi.org/10.22320/s0718221x/2026.03
  • A

    Decay and leaching resistance of spruce and larch woods treated with preservatives following different incising pretreatments

    Davut Bakır
    e0426
    DOI: https://doi.org/10.22320/s0718221x/2026.04

  • The utilisation of turpentine and moss oil as epoxy hardeners for bio-based epoxy nanocomposite coatings

    Ilknur Babahan Bircan, Çaglar Altay, Ergun Baysal, Birsen Kırım, Safiye Emirdağ, Hilmi Toker, Muazzez Çelik, Edanur Kocaman
    e0526
    DOI: https://doi.org/10.22320/s0718221x/2026.05
  • A

    Eco-friendly protection of pine wood using copper nanoparticles biosynthesized from Cleistocalyx operculatus leaf extracts

    Tram Tran Thi Bao , Tu Thi Anh Le
    e0626
    DOI: https://doi.org/10.22320/s0718221x/2026.06
  • A

    Image based colorimetric characterization of scrub induced color changes in UV printed and water transfer printed MDF boards

    Mehmet Budakçı, Serdar Kaçamer, Ferzan Katırcıoğlu
    e0726
    DOI: https://doi.org/10.22320/s0718221x/2026.07
  • A

    Comparative evaluation of three-way mortise-and-tenon joint designs considering mechanical strength and machinability

    Yuqing Yang, Zhao Zhongyuan, Wengang Hu
    e0826
    DOI: https://doi.org/10.22320/s0718221x/2026.08
  • A

    Experimental characterization of briquettes produced from Eucalyptus bark with cassava starch binder

    Maria Fernanda Felippe Silva, Camilla Kawane de Carvalho Araujo, João Vítor Felippe Silva, Gabriel Alexandre Pio, Fábio Silva do Rosário, Elen Morales, Maristela Gava, José Caraschi
    e0926
    DOI: https://doi.org/10.22320/s0718221x/2026.09
  • A

    Classification of four wood species using terahertz time-domain spectroscopy THZ-TDS

    Jimy Frank Oblitas Cruz, Glicerio Eduardo Torres Carranza
    e1026
    DOI: https://doi.org/10.22320/s0718221x/2026.10
  • A

    Anatomical responses in apricot wood structure caused by Valsaria insitiva

    Oľga Mišíková, Barbora Slováčková, Pavol Hlaváč
    e1126
    DOI: https://doi.org/10.22320/s0718221x/2026.11
  • A

    Influence of particle size and blending ratio on the physical and mechanical properties of falcata sawdust-recycled LDPE wood-plastic composites

    Juanito Jr. Jimenez
    e1226
    DOI: https://doi.org/10.22320/s0718221x/2026.12
  • A

    Laminated bamboo lumber beams: An evaluation of structural behavior and bonding quality

    João Vítor Felippe Silva, Thiago Oliveira dos Santos, Julio Cesar Molina
    e1326
    DOI: https://doi.org/10.22320/s0718221x/2026.13
  • A

    Axial variation of color and Shore D hardness in Cedrus libani wood

    Uğur Özkan, Burak Koparan, Onur Alkan, Nazlı Öğüt, Şerife Kalkanlı, Candan Kuş Şahin
    e1426
    DOI: https://doi.org/10.22320/s0718221x/2026.14
  • A

    Experimental analysis of axial variation in physical and mechanical properties of Detarium microcarpum wood and its potential for sustainable utilization

    Zulkarnain Abdul Samed, Mark Bright Donkoh, Issah Chakurah, Francis Kofi Bih, Stephen Mitchual
    e1526
    DOI: https://doi.org/10.22320/s0718221x/2026.15
  • A

    Impact of nano-aluminum-oxide impregnation, densification, and vapor pre-treatment on the physical and mechanical properties of white willow wood

    Hamid Reza Taghiyari, Kazem Ahmadi, Roya Majidi, Ghonche Rassam, Petar Antov, Seng Hua Lee, Syeed SaifulAzry Osman Al Edrus
    e1626
    DOI: https://doi.org/10.22320/s0718221x/2026.16