Optimizing passive design strategies in warm-humid climates: a holistic framework for green building rating systems

Authors

DOI:

https://doi.org/10.22320/07190700.2025.15.02.07

Keywords:

passive design strategies, GBRTs, sustainability performance, warm-humid climate, weighted scoring model

Abstract

Green Building Rating Tools (GBRTs) such as LEED, BREEAM, GRIHA, and WELL assess building sustainability but often overlook a standardized framework for evaluating passive design strategies, which are critical for energy efficiency and thermal comfort in warm-humid climates. This study proposes a holistic framework for optimizing passive strategies by integrating qualitative expert insights with quantitative data across rating systems. Using PCA, MCDA, and regression modelling, a weighted scoring system is developed to compare strategies. Analysis shows that combined passive strategies significantly improve sustainability performance. Home Performance Index (24.72) and ARZ (23.06) score highest in passive design emphasis, while LEED (10.91) and GRIHA (9.96) reveal improvement potential. The proposed AHP framework focuses on envelope optimization, natural ventilation, insulation, and material selection to enhance climate responsiveness. Case studies demonstrate that passive measures such as shading, ventilation, and insulation reduce cooling loads by 59%, lower indoor temperatures by 2.5–3°C, and boost energy savings by up to 29%, reinforcing their value in warm-humid climate contexts.

Downloads

Download data is not yet available.

Author Biographies

Karthik Chadalavada, School of Planning and Architecture, Vijayawada, India

Master of Architecture
Assistant Professor, Department of Architecture

Kranti-Kumar Myneni, School of Planning and Architecture, Vijayawada, India

Doctor of Philosophy
Assistant Professor, Department of Architecture

Srinivas Daketi, School of Planning and Architecture, Vijayawada, India

Doctor of Philosophy
Professor, Department of Architecture

References

AKSAMIJA, A. (2013). Sustainable facades: Design methods for high-performance building envelopes. John Wiley & Sons.

ALAIDROOS, A., & KRARTI, M. (2016). Numerical modeling of ventilated wall cavities with spray evaporative cooling system. Energy and Buildings, 130, 350–365. https://doi.org/10.1016/j.enbuild.2016.08.046 DOI: https://doi.org/10.1016/j.enbuild.2016.08.046

ALI, H. H., AL NSAIRAT, S. F., & AL MAANI, A. (2019). Evaluating green building rating systems for suitability in Jordan. Building and Environment, 148, 60–73. https://doi.org/10.1016/j.buildenv.2018.11.015 DOI: https://doi.org/10.1016/j.buildenv.2018.11.015

ALTAN, H., HAJIBANDEH, M., TABET AOUL, K. A., & DEEP, A. (2016). Passive design in M. Noguchi (Ed.) ZEMCH: Toward the delivery of zero energy mass custom homes (pp. 209-236). Springer. https://doi.org/10.1007/978-3-319-31967-4_8 DOI: https://doi.org/10.1007/978-3-319-31967-4_8

ATAMPUGRE, G., MENSAH, E., MABHAUDHI, T., & COFIE, O. (2022). Towards a framework for assessing the sustainability of social-ecological landscapes. IWMI.

BERARDI, U. (2017). A cross-country comparison of the building energy consumptions and their trends. Resources, Conservation and Recycling, 123, 230-241. https://doi.org/10.1016/j.resconrec.2016.03.014 DOI: https://doi.org/10.1016/j.resconrec.2016.03.014

BRE GLOBAL. (2016). BREEAM New Construction Manual. Building Research Establishment.

BUREAU OF INDIAN STANDARDS. (2016). National Building Code of India 2016 (Vol. 2). https://dn790000.ca.archive.org/0/items/nationalbuilding02/in.gov.nbc.2016.vol2.digital.pdf

CHEN, X., YANG, H., & LU, L. (2015). A comprehensive review on passive design approaches in green building rating tools. Renewable and Sustainable Energy Reviews, 50, 1425–1436. https://doi.org/10.1016/j.rser.2015.06.003 DOI: https://doi.org/10.1016/j.rser.2015.06.003

CHEN, Y., MAE, M., TANIGUCHI, K., KOJIMA, T., MORI, H., TRIHAMDANI, A. R., MORITA, K., & SASAJIMA, Y. (2021). Performance of passive design strategies in hot and humid regions. Case study: Tangerang, Indonesia. Journal of Asian Architecture and Building Engineering, 20(4), 458-476. https://doi.org/10.1080/13467581.2020.1798775 DOI: https://doi.org/10.1080/13467581.2020.1798775

CHENVIDYAKARN, T. (2018). Passive design for thermal comfort in hot humid climates. Journal of Architectural/Planning Research and Studies (JARS), 5(1), 1-28. https://doi.org/10.56261/jars.v5i1.169198 DOI: https://doi.org/10.56261/jars.v5i1.169198

EL GINDI, S. (2023). Evaluation of the effectiveness of passive design strategies in achieving thermal comfort in residential buildings in Egypt. IOP Conference Series: Earth and Environmental Science, 1283(1), 012011. https://doi.org/10.1088/1755-1315/1283/1/012011 DOI: https://doi.org/10.1088/1755-1315/1283/1/012011

HU, M., ZHANG, K., NGUYEN, Q., & TASDIZEN, T. (2023). The effects of passive design on indoor thermal comfort and energy savings for residential buildings in hot climates: A systematic review. Urban Climate, 49, 101466. https://doi.org/10.1016/j.uclim.2023.101466 DOI: https://doi.org/10.1016/j.uclim.2023.101466

INTERNATIONAL ENERGY AGENCY [IEA]. (2020). Energy Efficiency 2020. OECD Publishing, Paris. https://doi.org/10.1787/dfd85134-en DOI: https://doi.org/10.1787/dfd85134-en

JADHAV, L., LOKHANDE, S., TUPE, A., BADE, A., TUPE, A., & SANKPAL, A. (2020). Comparative study of LEED, BREEAM and GRIHA rating system. International Journal of Engineering Research and Technology, 8(12), 1235–1238. https://doi.org/10.17577/IJERTV8IS120305 DOI: https://doi.org/10.17577/IJERTV8IS120305

JEGA, A. I., & MUHY AL-DIN, S. S. (2023). Implication of shading passive strategies in buildings of hot and humid climates for energy optimization: Lessons from vernacular dwellings in Nigeria. Journal of Salutogenic Architecture, 2(1), 50-69. https://doi.org/10.38027/jsalutogenic_vol2no1_4 DOI: https://doi.org/10.38027/jsalutogenic_vol2no1_4

KENT, M. G., PARKINSON, T., & SCHIAVON, S. (2024). Indoor environmental quality in WELL-certified and LEED-certified buildings. Scientific Reports, 14(1), 15120. https://doi.org/10.1038/s41598-024-65768-w DOI: https://doi.org/10.1038/s41598-024-65768-w

KOCHHAR, P., MAHAL, N., SETH, S., & SINGH, M. (2022). Green Rating for Integrated Habitat Assessment—A green-building rating system for catalysing climate-change mitigation/adaptation in India. F1000Research, 11, 153. https://doi.org/10.12688/f1000research.108826.1 DOI: https://doi.org/10.12688/f1000research.108826.1

LEGG, S. (2021). IPCC, 2021: Climate change 2021 – the Physical Science basis. Interaction, 49(4), 44-45. https://search.informit.org/doi/10.3316/informit.315096509383738

MUSHTAHA, E., SALAMEH, T., KHARRUFA, S., MORI, T., ALDAWOUD, A., HAMAD, R., & NEMER, T. (2021). The impact of passive design strategies on cooling loads of buildings in temperate climate. Case Studies in Thermal Engineering, 28, 101588. https://doi.org/10.1016/j.csite.2021.101588 DOI: https://doi.org/10.1016/j.csite.2021.101588

RANA, K. (2021). Towards passive design strategies for improving thermal comfort performance in a naturally ventilated residence. Journal of Sustainable Architecture and Civil Engineering, 29(2), 150-174. https://doi.org/10.5755/j01.sace.29.2.29256 DOI: https://doi.org/10.5755/j01.sace.29.2.29256

SHAN, M., & HWANG, B.-G. (2018). Green building rating systems: Global reviews of practices and research efforts. Sustainable cities and society, 39, 172-180. https://doi.org/10.1016/j.scs.2018.02.034 DOI: https://doi.org/10.1016/j.scs.2018.02.034

SOSA-CASTRO, M. B., CORREA, E. N., & CANTÓN, M. A. (2017). Influence of urban morphology on outdoor thermal habitability in an arid city. Sustainable Habitat, 7(1), 44–53. https://revistas.ubiobio.cl/index.php/RHS/article/view/2616

STEEMERS, K. (2003). Energy and the city: Density, buildings, and transport. Energy and Buildings, 35(1), 3–14. https://doi.org/10.1016/S0378-7788(02)00075-0 DOI: https://doi.org/10.1016/S0378-7788(02)00075-0

SZOKOLAY, S. V. (2012). Introduction to architectural science: The basis of sustainable design. Routledge. https://doi.org/10.4324/9780080473130 DOI: https://doi.org/10.4324/9780080473130

TANG, K. H. D., FOO, C. Y. H., & TAN, I. S. (2020). A review of the green building rating systems. IOP Conference Series: Materials Science and Engineering, 943, 012060. https://doi.org/10.1088/1757-899X/943/1/012060 DOI: https://doi.org/10.1088/1757-899X/943/1/012060

USGBC. (2019). LEED v4 for Building Design and Construction. U.S. Green Building Council. https://www.usgbc.org/sites/default/files/LEED%20v4%20BDC_07.25.19_current.pdf

UNITED NATIONS ENVIRONMENT PROGRAM [UNEP]. (2020). Emissions Gap Report 2020. United Nations Environment Programme, Nairobi. https://www.unep.org/emissions-gap-report-2020

ZAHIRI, S., & ALTAN, H. (2016). The effect of passive design strategies on thermal performance of female secondary school buildings during warm season in a hot and dry climate. Frontiers in Built Environment, 2. https://doi.org/10.3389/fbuil.2016.00003 DOI: https://doi.org/10.3389/fbuil.2016.00003

Downloads

Published

2025-12-30

How to Cite

Chadalavada, K., Myneni, K.-K., & Daketi, S. (2025). Optimizing passive design strategies in warm-humid climates: a holistic framework for green building rating systems. Sustainable Habitat, 15(2), 90–101. https://doi.org/10.22320/07190700.2025.15.02.07

Issue

Section

Artículos