The effects of thermal aging on color and glossiness in UV cured coatings applied to sessile oak

Authors

  • Sırrı Şahin Ataturk University. Agriculture Faculty. Department of Agricultural Buildings and Irrigation. Erzurum, Türkiye.
  • Ümit Ayata Bayburt University. Faculty of Arts and Design. Department of Interior Architecture and Environmental Design. Bayburt, Türkiye.
  • Bruno Esteves Polytechnic Institute of Viseu. Research Center for Natural Resources. Environment and Society (CERNAS). Viseu, Portugal. https://orcid.org/0000-0001-6660-3128

DOI:

https://doi.org/10.22320/s0718221x/2025.01

Keywords:

Coating, color, glossiness, sessile oak, wood surface quality, thermal aging, wood flooring

Abstract

Color and glossiness are two important aesthetic properties of wood flooring and wood furniture that significantly affect consumers choice. With time the coating deteriorates altering the surface properties. Understanding these changes is important for furniture industry, impacting design choices, material selection, and long-term maintenance.

The effects of thermal aging (30 °C for 30 days, 60 °C for 60 days, and 90 °C for 90 days) on color parameters (C*, L*, b*. a*, ho) and glossiness on both perpendicular (⊥) and parallel (║) directions at 20°, 60°, and 85° angles in UV-cured coatings applied on sessile oak were studied. Results show that statistically significant differences were observed in the glossiness values, as well as in C*, b*, a*, L* and ho. As the temperature and duration of the thermal aging process increased, there was a noticeable increase in the values of color parameters b*, a*, and C*, while the values of ho and L* decreased. The characteristics of the surfaces exposed to thermal aging have undergone a complete transformation.

Downloads

Download data is not yet available.

Author Biographies

Sırrı Şahin, Ataturk University. Agriculture Faculty. Department of Agricultural Buildings and Irrigation. Erzurum, Türkiye.

Biography

Ümit Ayata, Bayburt University. Faculty of Arts and Design. Department of Interior Architecture and Environmental Design. Bayburt, Türkiye.

Biography

Bruno Esteves, Polytechnic Institute of Viseu. Research Center for Natural Resources. Environment and Society (CERNAS). Viseu, Portugal.

Biography

References

ASTM. 2007. Standard practice for calculation or color tolerances and color, differences from instrumentally measured color coordinates, ASTM D 2244-3. ASTM. West Conshohocken, PA. USA.

Ayata, Ü. 2019. Effects of artificial weathering on the surface properties of ultraviolet varnish applied to lemonwood (Citrus limon (L.) Burm.). BioResurces 14:8313-8323. https://doi.org/10.15376/biores.14.4.8313-8323.

Ayata, Ü.; Bal, B.C. 2023a. The effects of thermal aging on the color and glossiness properties of UV-cured varnish coatings applied to sapele (Entandrophragma cylindricum) wood. EU 2nd International Conference on Health, Engineering and Applied Sciences, August 4-6, 2023, Belgrade, Serbia, 106-114. https://www.avrupakongresi.org/_files/ugd/797a84_99809de94f7e46cdb8d07fe67258f37e.pdf

Ayata, Ü.; Bal, B.C. 2023b. Investigation of some surface properties of iroko (Milicia excelsa Welw. C.C. Berg) wood with UV system parquet varnish exposed to thermal aging application. EU 1st International Conference on Health, Engineering and Applied Sciences, May 5-7, 2023, Bucharest, Romania, 578-586. https://www.avrupakongresi.org/_files/ugd/797a84_16ee778530a74f50998c7b98209a297e.pdfTürkiye

Ayata, Ü.; Çakıcıer, N.; Gürleyen, L. 2021a. Determination of the artificial aging performance of the apricot wood applied with UV system parquet varnish used indoors. Furniture and Wooden Material Research Journal 4(1):40-50. https://doi.org/10.33725/mamad.922311

Ayata, Ü.; Çakıcıer, N.; Gürleyen, L. 2021b. Effects of artificial aging of UVB-313 lamps on some surface properties of UV system varnished black locust wood. Bitlis Eren University Journal of Science and Technology 10(4):1492-1505. https://doi.org/10.17798/bitlisfen.980669

Ayata, Ü.; Çakıcıer, N.; Gürleyen, L. 2021c. Determination of some surface properties of UV curable varnish-applied cedar wood after artificial aging application. Furniture and Wooden Material Research Jour- nal 4(2):145-154. https://doi.org/10.33725/mamad.1005120

Ayata, Ü.; Çakıcıer, N.; Gürleyen, L. 2022a. The effect of artificial aging on color, glossiness, pendulum hardness and adhesion to the surface of black poplar wood treated with UV curable varnish. Gümüşhane University Journal of Science and Technology 12(3):951-963. https://doi.org/10.17714/gumusfenbil.986610

Ayata, Ü.; Efe, FT.; Türk, M.; Çakıcıer, N.; Gürleyen, L. 2022b. Comparison of the effects of accelerated aging with different lamps (UV-A and -B) on color and pendulum hardness properties of Russian olive wood treated with UV system varnish. Eurasian Journal of Forest Science 10(1):11-19. https://doi.org/10.31195/ejejfs.1039629

Ayata, U.; Sahin, S.; Esteves, B.; Gurleyen, L. 2018. Effect of thermal aging on colour and glossiness of UV system varnish-applied laminated parquet layers. Bioresources 13(1):861-868. https://doi.org/10.15376/biores.13.1.861-868

Barański, J.; Klement, I.; Vilkovská, T.; Konopka, A. 2017. High temperature drying process of beech wood (Fagus sylvatica L.) with different zones of sapwood and red false heartwood. BioResources 12(1):1861- 1870. https://doi.org/10.15376/biores.12.1.1861-1870

Blom, Å.; Johansson, J.; Sivrikaya, H. 2013. Some factors influencing susceptibility to discoloring fungi and water uptake of Scots pine (Pinus sylvestris), Norway spruce (Picea abies) and Oriental spruce (Picea orientalis). Wood Material Science and Engineering 8(2): 139-144. https://doi.org/10.1080/17480272.2012.745095

Cavus, V. 2021. Weathering Performance of Mulberry Wood with UV Varnish Applied and Its Mechanical Properties. BioResources 16(4):6791-6798. https://doi.org/10.15376/biores.16.4.6791-6798

Davidson, R.S. 2001. Radiation Curing. Rapra Technology Ltd., Shawbury, England 12.

Demirci, Z.; Sönmez, A.; Budakci, M. 2013. Effect of thermal ageing on the gloss and the adhesion strength of the wood varnish layers. BioResources, 8(2):1852-1867. https://doi.org/10.15376/biores.8.2.1852-1867

Döngel, N. 2005. Technical properties of wood and wood-based floor covering materials (parquet). Ph.D. Thesis, Gazi University Institute of Natural and Applied Sciences, Ankara, Turkey.

Fibiger, W. 1998. Coating Technology. III. Industrial Coatings. 3rd Edition. Ed. Fibiger, W.; Boyce, A.C. ITE Consultants: Canada.

Gao, J.; Zhang, B.; Chang, J. 2004. Induced discoloration of buerger maple during drying process. Forestry Studies in China 6(2): 50-55. https://doi.org/10.1007/s11632-004-0020-6

Gustafsson, L.; Borjesson, P. 2007. Life cycle assessment in green chemistry: A comparison of various industrial wood surface coatings. The International Journal of Life Cycle Assessment 12:151-159. https://doi.org/10.1065/lca2006.11.280

Kamperidou, V. 2021. Chemical and Structural Characterization of Poplar and Black Pine Wood Exposed to Short Thermal Modification. Drvna Industrija 72(2): 155-167. https://doi.org/10.5552/drvind.2021.2026

ISO. 1994. Paints and varnishes - determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees, ISO 2813. ISO: Geneva, Switzerland.

Lange, D.R. 1999. Fundamentals of Colourimetry - Application Report No. 10e. D.R Lange: New York, NY, USA.

Liu, X.Y.; Timar, M.C.; Varodi, A.M.; Sawyer, G. 2017. An investigation of accelerated temperature-induced ageing of four wood species: colour and FTIR. Wood Science and Technology 51:357-378. https://doi.org/10.1007/s00226-016-0867-4

Moon, J.H.; Shul, Y.G.; Han, H.S.; Hong, S.Y.; Choi, Y.S.; Kim, H.T. 2005. A study on UV-curable adhesives for optical pick-up: I. Photo-initiator effects. International Journal of Adhesion and Adhesives 25(4):301-312. https://doi.org/10.1016/j.ijadhadh.2004.09.003

TS. 1997. Standard atmospheres for conditioning and/or testing; specifications. TS ISO 642 554. Turkish Standards Institution: Ankara, Turkey.

TS. 2021. Physical and mechanical properties of wood - Test methods for small clear wood specimens - Part 1: Determination of moisture content for physical and mechanical tests. TS ISO 13061-1. Turkish Standards Institution: Ankara, Turkey.

Narayan, R. 2002. Doctoral Thesis, Submitted to ISM Dhanbad, India.

Sahin, S.; Esteves, B.; Can, A.; Sivrikaya, H.; Domingos, I.; Ferreira, J.; Ayata, Ü. 2023. Effects of Artificial Weathering on the Surface Properties of Coated Radiata Pine. Maderas. Ciencia y Tecnología 25: e29. https://doi.org/10.4067/S0718-221X2023000100429

Salca, E.A.; Krystofiak, T.; Lis, B.; Mazela, B.; Proszyk, S. 2016. Some coating properties of black alder wood as a function of varnish type and application method. BioResources 11(3): 7580-7594. https://doi.org/10.15376/biores.11.3.7580-7594

Salca, E.A.; Krystofiak, T.; Lis, B.; Hiziroglu, S. 2021. Glossiness Evaluation of Coated Wood Surfaces as Function of Varnish Type and Exposure to Different Conditions. Coatings 11: e558. https://doi.org/10.3390/coatings11050558

Sandoval-Torres, S.; Jomaa, W.; Marc, F.; Puiggali, J.R. 2010. Causes of color changes in wood during drying. Forestry Studies in China 12(4): 167-175. https://doi.org/10.1007/s11632-010-0404-8

Sjökvist, T.; Blom, Å.; Ahmed, S. A.; Sjökvist, T.; Blom, Å.; Ahmed, S. A. 2020. Liquid water ab- sorption in coated Norway spruce: Impact of heartwood, sapwood, density and weather exposure. Maderas. Ciencia y Tecnologia 22(3): 335-346. https://doi.org/10.4067/S0718-221X2020005000308

Sjökvist, T.; Blom, Å.; Wålinder, M.E.P. 2019. The influence of heartwood, sapwood and density on moisture fluctuations and crack formations of coated Norway spruce in outdoor exposure. Journal of Wood Science 65(1): e45. https://doi.org/10.1186/s10086-019-1825-1

Sjökvist, T.; Wålinder, M.E.P.; Blom, Å. 2018. Liquid sorption characterisation of Norway spruce heart-wood and sapwood using a multicycle Wilhelmy plate method. International Wood Products Journal 9(2): 58-65. https://doi.org/10.1080/20426445.2018.1467602

Takami, K.; Matsuno, R.; Ishihara, K. 2011. Synthesis of polyurethanes by polyaddition using diol compounds with methacrylate-derived functional groups. Polymer 52(24):5445-5451. https://doi.org/10.1016/j.polymer.2011.09.037

Tolvaj, L.; Molnar, Z.; Nemeth, R. 2013. Photodegradation of wood at elevated temperature: Infrared spectroscopic study. Journal of Photochemistry and Photobiology B: Biology 121:32-36. https://doi.org/10.1016/j.jphotobiol.2013.02.007

Wang, F.; Hu, J.Q.; Tu, W.P. 2008. Study on microstructure of UV-curable polyurethane acrylate films. Progress in Organic Coatings 62(3):245-250. https://doi.org/10.1016/j.porgcoat.2007.12.005

White, R.H.; Dietenberger, M.A. 2001. Wood products: Thermal degradation and fire. Encyclopedia of Materials: Science and Technology. 9712-9716. https://doi.org/10.1016/B0-08-043152-6/01763-0

Downloads

Published

2024-10-04

How to Cite

Şahin, S. ., Ayata, Ümit ., & Esteves, B. . (2024). The effects of thermal aging on color and glossiness in UV cured coatings applied to sessile oak . Maderas. Ciencia Y Tecnología, 27. https://doi.org/10.22320/s0718221x/2025.01

Issue

Section

Article

Most read articles by the same author(s)