Vol. 24 (2022)

					View Vol. 24 (2022)
Published: 2022-01-01

Article

  • Optimization of cnc operating parameters to minimize surface roughness of Pinus sylvestris using integrated artificial neural network and genetic algorithm

    Ayşenur Gürgen, Ali Çakmak, Sibel Yıldız, Abdulkadir Malkoçoğlu
    1-12
  • Mass transfer properties of Acacia mangium plantation wood

    Ha Tien Manh, Adam L. Redman, Chuong Pham Van, Bui Duy Ngoc
    1-12
    DOI: https://doi.org/10.4067/s0718-221x2022000100402
  • Plywoods of northeast argentinian woods and soybean protein-based adhesives: Relationship between morphological aspects of veneers and shear strength values

    E. S. Nicolao, S. Monteoliva, E.M. Ciannamea, P. Stefani
    1-14
    DOI: https://doi.org/10.4067/s0718-221x2022000100403
  • A novel method for producing a glulam from the wood of peeler cores

    Daniel Koynov, Rosen Grigorov, Miglena Valyova
    1-8
    DOI: https://doi.org/10.4067/s0718-221x2022000100404
  • Simultaneous treatment with oil heat and densification on physical properties of Populus × canadensis wood

    Antonio Villasante, Santiago Vignote, Alvaro Fernandez-Serrano, Rubén Laina
    1-12
    DOI: https://doi.org/10.4067/s0718-221x2022000100405
  • Fumigation of imported Tectona grandis and southern yellow pine with Pongamia pinnata seed oil against sapstain and mould

    Anamika Sahu, Sadhna Tripathi, Sauradipta Ganguly, Akhato Sumi
    1-12
    DOI: https://doi.org/10.4067/s0718-221x2022000100406
  • Some surface characterıstıcs of orıental beech wood ımpregnated wıth some fıre-retardants and coated wıth polyurea/polyurethane hybrıd and epoxy resıns

    Çağlar Altay, Hilmi Toker, Ergün Baysal, İlknur Babahan
    1-12
    DOI: https://doi.org/10.4067/s0718-221x2022000100407
  • Physical properties of palmyra palm wood for sustainable utilization as a structural material

    James Boakye Acheampong, Bernard Effah, Kwaku Antwi, Ernest Wenia Achana
    1-14
    DOI: https://doi.org/10.4067/s0718-221x2022000100408
  • Physical, chemical and mechanical characterization of Acrocarpus fraxinifolius cultivated in Sao Paulo

    Karina A. de Oliveira, Carolina A. Barros Oliveira, Julio C. Molina
    1-8
    DOI: https://doi.org/10.4067/s0718-221x2022000100409
  • Evaluación de impactos ambientales de viviendas en madera: el caso de “La casa Uruguaya”

    Bernardette Soust-Verdaguer, Laura Moya, Carmen Llatas
    1-12
    DOI: https://doi.org/10.4067/s0718-221x2022000100410
  • An evaluation of clove (Eugenia caryophyllata) essential oil as a potential alternative antifungal wood protection system for cultural heritage conservation

    Dana Mihaela Pop, Maria Cristina Timar, Anca Maria Varodi, Emanuela Carmen Beldean
    1-16
    DOI: https://doi.org/10.4067/s0718-221x2022000100411
  • Preparation of plywood panels using waste milk pouches as an adhesive

    Siddhartha Arya, Shakti Chauhan
    1-10
    DOI: https://doi.org/10.4067/s0718-221x2022000100412
  • Mechanical, thermal, and morphological behaviour studies on coconut shell and palm kernel filler biocomposite

    Sreeraman Narayanan, Sathish Gandhi Veeramalai Chinnasamy, Surendiran Thirugnanasambandan, Kumaravelan Radhakrishnan
    1-14
    DOI: https://doi.org/10.4067/s0718-221x2022000100414
  • Particle image velocimetry technique and ultrasound method to obtain the modulus of elasticity of Bertholletia excelsa wood

    Eduardo Hélio de Novais Miranda, Rayner Pathele Ferreira, Rodrigo Allan Pereira, Taiane Oliveira Guedes, Fernando Pujaico Rivera, Diogo Antonio Correa Gomes
    1-8
    DOI: https://doi.org/10.4067/s0718-221x2022000100413
  • Effectiveness of european oak wood staining with iron (ii) sulphate during natural weathering

    Agnieszka Jankowska, Arkadiusz Kwiatkowski
    1-10
    DOI: https://doi.org/10.4067/s0718-221x2022000100415
  • Applying colorimetry for wood differentiation of fabaceae species grown in southern brazil

    Helena Cristina Vieira, Joielan Xipaia dos Santos, Deivison Venicio Souza, Polliana D’ Angelo Rios, Graciela Inés Bolzon de Muñiz, Simone Ribeiro Morrone, Silvana Nisgoski
    1-12
    DOI: https://doi.org/10.4067/s0718-221x2022000100416
  • Comparative study on weathering durability property of phenol formaldehyde resin modified sweetgum and southern pine specimens

    Wengang Hu, Hui Wan
    1-14
    DOI: https://doi.org/10.4067/s0718-221x2022000100417
  • Effect of the thermal treatment on the chemical components, sorption, and shrinkage properties of Tectona grandis juvenile wood

    Juliana de Oliveira Lopes, Claudia B. Cáceres, Roger E. Hernández, Rosilei A. Garcia
    1-16
    DOI: https://doi.org/10.4067/s0718-221x2022000100418
  • Influence of growth parameters on wood density of Acacia auriculiformis

    Jesugnon Fifamè Murielle Féty Tonouewa, Samadori Sorotori Honoré Biaou, Eméline Sêssi Pélagie Assede, Patrick Langbour, Ogoulonou Rodrigue Balagueman
    1-14
    DOI: https://doi.org/10.4067/s0718-221x2022000100419
  • Evaluation and comparison of control and heat treated l-shape furniture joints produced from scotch pine and ash wood under static bending and cyclic fatigue bending loadings

    Samet Demirel, Ruveyda Sener
    1-14
    DOI: https://doi.org/10.4067/s0718-221x2022000100420
  • Application of a strain gauge to assess drying stresses in normal and tension wood of corymbia citriodora

    José Yony Cricel Sima Sánchez, José Tarcísio Lima, José Reinaldo Moreira da Silva, Bruno Charles Dias Soares
    1-10
    DOI: https://doi.org/10.4067/s0718-221x2022000100421
  • Changes in the content and composition of the extractives in thermally modified tropical hardwoods

    Bruno Esteves, Umit Ayata, Luísa Cruz-Lopes, Isabel Brás, José Ferreira, Idalina Domingos
    1-14
    DOI: https://doi.org/10.4067/s0718-221x2022000100422
  • Mechanıcal and fıre propertıes of orıental beech ımpregnated wıth fıre-retardants and coated wıth polyurea/polyurethane hybrıd and epoxy resıns

    Çağlar Altay, Hilmi Toker, Ergün Baysal, İlknur Babahan, Halil Kılıç
    1-14
    DOI: https://doi.org/10.4067/s0718-221x2022000100423
  • Combining artificial neural network and moth-flame optimization algorithm for optimization of ultrasound-assisted and microwave-assisted extraction parameters: Bark of Pinus brutia

    Ayşenur Gürgen, Başak Atilgan, Sibel Yildiz, Oktay Gönültaş, Sami İmamoğlu
    1-18
    DOI: https://doi.org/10.4067/s0718-221x2022000100424
  • Lumber drying of pinus: Geostatistics applied to drying kilns

    Winicius Augusto Schaeffer, Thiago Campos Monteiro, Ricardo Jorge Klitzke, Allan Libanio Pelissari, Claudio Gumane Francisco Juizo, Tarcila Rosa da Silva Lins
    1-10
    DOI: https://doi.org/10.4067/s0718-221x2022000100425
  • Evolución del color y de la aparición de defectos en la madera de eucalyptus globulus expuesta a intemperismo natural

    Karen Gabriela Moreno, Eleana María Spavento, Silvia Estela Monteoliva
    1-12
    DOI: https://doi.org/10.4067/s0718-221x2022000100426
  • The effects of bioincising by Physisporinus vitreus on cuo retention and copper element leaching in oriental spruce wood

    Davut Bakir, Saip Nami Kartal, Evren Terzi, Ayşe Dilek Dogu
    1-14
    DOI: https://doi.org/10.4067/s0718-221x2022000100427
  • Properties of gypsum particleboard with added mineral dolomite

    Omer Umit Yalçin, Ali İhsan Kaya
    1-16
    DOI: https://doi.org/10.4067/s0718-221x2022000100428
  • Shear strength and hardness of two tropical wood species as function of heat treatment

    Alia Syahirah Yusoh, Fatimah Athiyah Sabaruddin, Paridah Md Tahir, Lee Seng Hua, Uyup Mohd Khairun Anwar, Hamdan Husain, Aizat Ghani, Salim Hiziroglu
    1-10
    DOI: https://doi.org/10.4067/s0718-221x2022000100429
  • Wettability and decay of particleboards manufactured with thermally treated sugarcane residue and bamboo (Dendrocalamus asper) particles

    Flávia Maria Silva Brito, Geraldo Bortoletto Júnior, Juarez Benigno Paes
    1-18
    DOI: https://doi.org/10.4067/s0718-221x2022000100430
  • Weight–strength optimization of wooden household chairs based on member section size

    Ersan Güray, Erkan Ceylan, Ali Kasal
    1-14
    DOI: https://doi.org/10.4067/s0718-221x2022000100431
  • Colorimetría y densitometría en madera de Guazuma crinita

    Manuel Chavesta, Rolando Montenegro, Jordan Romero, Mario Tomazello-Filho, Mayara Carnerio, Silvana Nisgoski
    1-12
    DOI: https://doi.org/10.4067/s0718-221x2022000100432
  • Formaldehyde free tannin-based adhesive with epoxy as hardener for plywood

    Bowen Liu, Yunxia Zhou, Hisham Essawy, Qian Chen, Jiankun Liang, Xiaojian Zhou, Jun Zhang, Guanben Du
    1-18
    DOI: https://doi.org/10.4067/s0718-221x2022000100433
  • Prediction of surface roughness of CO2 laser modified poplar wood via response surface methodology

    Rongrong Li, Chujun He, Wei Xu, Xiaodong Wang
    1-12
    DOI: https://doi.org/10.4067/s0718-221x2022000100442
  • Effect of borax-boric acid and ammonium polyphosphate on flame retardancy of natural fiber polyethylene composites

    Ritesh Kumar, Jayshree Gunjal, Shakti Chauhan
    1-10
    DOI: https://doi.org/10.4067/s0718-221x2022000100434
  • Evaluation of mycelium composite materials produced by five patagonian fungal species

    Mariano Aquino, Maximiliano Rugolo, Gerardo Robledo, Francisco Kuhar
    1-14
    DOI: https://doi.org/10.4067/s0718-221x2022000100435
  • Predictive expressions for withdrawal force capacity of various size of dowels from particleboard and medium density fiberboard

    Mehmet Yüksel, Halil Kılıç, Tolga Kuşkun, Ali Kasal
    1-16
    DOI: https://doi.org/10.4067/s0718-221x2022000100436
  • Antifungal and larvicidal effects of wood vinegar on wood-destroying fungi and insects

    Memiş Akkuş, Çağlar Akçay, Mesut Yalçın
    1-10
    DOI: https://doi.org/10.4067/s0718-221x2022000100437
  • Chemical variations in tension wood of poplar tree induced by intermittent bending, fertilizer and hormone treatments

    Rahmatollah Gorgij, Kambiz Pourtahmasi, Reza Maali Amiri, Ali Abdolkhani, Maria Cristina Timar, Camelia Coşereanu
    1-12
    DOI: https://doi.org/10.4067/s0718-221x2022000100438
  • Investigations on the sorption behaviour of selected wood species from cameroon

    Peter Niemz, Jacques Michel Njankouo, Marco Torres, Erik Valentine Bachtiar
    1-10
    DOI: https://doi.org/10.4067/s0718-221x2022000100439
  • Exploratory studies on effects of growth location and conditioning on treatability and permeability of southern pine lumber

    Jerrold E. Winandy, H. M. Barnes, Jeffrey J. Morrell
    1-14
    DOI: https://doi.org/10.4067/s0718-221x2022000100440
  • Caracterización morfológica de las traqueidas de pino híbrido de rápido crecimiento

    Rosa Angela Winck, Maria Cristina Area, Ector Cesar Belaber, Diego Rolando Aquino, Hugo Enrique Fassola, María Elena Gauchat
    1-12
    DOI: https://doi.org/10.4067/s0718-221x2022000100443
  • Carbon footprint of wooden and plastic pallets: A quantification with different software tools

    Marcia Vásquez, Leonardo Vásquez, Ricardo Musule, Alfredo Iriarte
    1-16
    DOI: https://doi.org/10.4067/s0718-221x2022000100445
  • Analysis of biochars produced from the gasification of pinus patula pellets and chips as soil amendments

    Jonatan Gutiérrez , Ainhoa Rubio-Clemente, Juan F. Pérez
    1-14
    DOI: https://doi.org/10.4067/s0718-221x2022000100449
  • Performance of cement-bonded wood particleboards produced using fly ash and spruce planer shavings

    Husnu Yel, Elvan Urun
    1-10
    DOI: https://doi.org/10.4067/s0718-221x2022000100444
  • Chemical constituents of palm wastes slow pyrolysis derived vinegar

    Ghanbar Ebrahimi, Alireza Shakeri, Pyman Ahmadi, Mosayeb Dalvand, Masoud Shafee, Hamid Zare Hosseinabadi
    1-8
    DOI: https://doi.org/10.4067/s0718-221x2022000100447
  • Efecto del ángulo microfibrilar en las características tecnológicas de la madera de Pinus pseudostrobus var. apulcensis

    Jahaziel Saucedo-Ibarra, Amparo Borja-de la Rosa, José Tarcísio Lima, Alejandro Corona-Ambriz, Roberto Machuca-Velasco
    1-18
    DOI: https://doi.org/10.4067/s0718-221x2022000100448
  • Comparison of thermal performances of plywood shear walls produced with different thermal insulation materials

    Abdullah Ugur Birinci, Aydin Demir, Hasan Ozturk
    1-12
    DOI: https://doi.org/10.4067/s0718-221x2022000100446
  • Deep eutectic solvent pulping from sorghum stalks

    Sezgin Koray Gülsoy, Aysun Küçüle, Ayhan Gençer
    1-12
    DOI: https://doi.org/10.4067/s0718-221x2022000100450
  • Natural durability of five tropical wood species in field decay tests

    Felipe Gomes Batista, Rafael Rodolfo De Melo, Dayane Targino de Medeiros, Pedro Jorge Goes Lopes, Darci Alberto Gatto
    1-10
    DOI: https://doi.org/10.4067/s0718-221x2022000100451
  • Characterization of Acrocarpus fraxinifolius wood submitted to heat treatment

    Carolina A. Barros Oliveira, Karina A. de Oliveira, Vinicius Borges de Moura Aquino, André Luis Christoforo, Julio C. Molina
    1-12
    DOI: https://doi.org/10.4067/s0718-221x2022000100454
  • Changing the calculated surface area of wood samples to define drying schedules for Eucalyptus clones

    Daiane de Moura Borges Maria, Natalino Calegario, Bruno Charles Dias Soares, Dáfilla Yara Oliveira de Brito, José Tarcísio Lima
    1-12
    DOI: https://doi.org/10.4067/s0718-221x2022000100452
  • Preliminary evaluation of the incorporation of cellulose nanofibers as reinforcement in waterborne wood coatings

    Tawani Lorena Naide, Pedro Henrique Gonzalez de Cademartori, Silvana Nisgoski, Graciela Inés Bolzon de Muñiz
    1-12
    DOI: https://doi.org/10.4067/s0718-221x2022000100453

Erratum